WE WILL BE REMOVING THE TRANSMISSION THAT IS ON THE
PAN, AND WILL HAVE A CUSTOM TRANNY BUILT BY JUSTIN
AT ACE. HE WILL BUILD A NON SPLIT CASE TRANNY UTILIZING
A SELECTION OF STOCK VW GEARS. WE WILL ALSO BE
INSTALLING STOCK SUSPENSION COMPONENTS AND NEWER
BRAKES.
_____________________________________________________________
WE WILL BE USING THE BUS NOSE CONE THIS IS THE CORE TRANNY WE WILL BE
OFF THE TRANNY THAT WAS IN THE CAR USING FOR MOST OF OUR BUILD
CLEANED AND BLASTED CASE CLEANED, BLASTED, AND REASSEMBLED
INTERMEDIATE HOUSING
CLEANED, BLASTED, AND REASSEMBLED CLEANED AND BLASTED SIDE PLATE
BUS NOSE CONE
OPPOSITE SIDE PLATE CLEANED AND POLISHED GEARS, WELDED
THIRD AND FOURTH GEARS
CLEANED TRANNY PIECES CLEANED TRANNY PIECES
ALL THE TRANNY PIECES DISSASSEMBLED, JUSTIN ASSEMBLING THE GEAR STACK
CLEANED AND READY TO BE BUILT
ASSEMBLED GEAR STACKS ASSEMBLED DIFFERENTIAL
ASSEMBLED INTERMEDIATE HOUSING JUSTIN INSTALLING THE INTERMEDIATE
HOUSING INTO THE CASE
VIEW OF THE PINION GEAR THROUGH THE INSTALLED DIFFERENTIAL
EMPTY DIFFERENTIAL HOUSING
A CLOSER VIEW OF THE DIFFERENTIAL ASSEMBLED AND CLEAR COATED TRANNY
AXLES AND TUBES ASSEMBLED TO THE VIEW OF THE NOSE CONE AND INTERMEDIATE
FINISHED TRANNY HOUSING
BUS FRONT MOUNT AXLE TUBE
THROW OUT BEARING AND HEAVY DUTY NEW SHIFT FORK DETENT PLUGS
CROSS SHAFT
NEW 12 VOLT STARTER BUSHING ANOTHER VIEW OF THE CLEAR COATED
TRANNY
YET ANOTHER VIEW OF THE ASSEMBLED STOCK GROUND STRAP
TRANNY
THE TRANNY MOCKED UP TO OUR PAN THE TRANNY AND REAR SUSPENSION IS
NOW INSTALLED ON THE PAN
ANOTHER VIEW OF THE INSTALLED TRANNY 58-67 REAR BRAKES INSTALLED
NAKATA GAS FILLED SHOCKS STUDDED DRUMS AND MICKEY THOMPSON
ET FRONT RUNNERS
MOON EYES DZUS FASTENERED SALT DISCS JOE GIBBS QUALIFYING GEAR OIL